LOGO YUREA

YUREA Polyurethane Foam

We create according to you.

YUREA Polyurethane Foam is a blended polyol rigid spray polyurethane system including HCFC 141b as blowing agent. This system is formulated to be used in the application for general spray application. The product contains flame retardant with B2 standard.

CHEMICAL CONDITION

YUREA Polyurethane Foam (Polyol)
Appearance : Light Yellowish to Reddish Liquid
Specific Gravity @ (25°C) : 1.06 – 1.12
Viscosity @ (25°C) : 160 – 200 mPas

YUREA Polyurethane Foam (Isocyanate)
Appearance : Dark Brown Liquid
Specific Gravity @ (25°C) : 1.22 – 1.26
Viscosity @ (25°C) : 150 – 250 mPas

PRODUCT REACTIVITY DATA

Material Temperature (⁰C) : 24 – 30
Mixing Ratio (Polyol : Iso) : 100 : 100
Cream Time (sec) : 1 – 3
Gel Time (sec) : 3 – 5
Core Density FRD (kg/m3) : 28 – 34

TYPICAL PHYSICAL PROPERTIES

Description
Test Standard
Unit
Value
Density (OMD)
ASTM D1622
Kg/m3
40
Compressive Strength
ASTM D1621
KPa
205
Dimensional Stability 48 hours exposure
@-20°C @100°C
ASTM D2126
% Change
0.3
0.3
Thermal Conductivity
ASTM C518
W/mK
0.02
Flammability
DIN 4102
-
B2

STORAGE RECOMMENDATION

YUREA Polyurethane Foam is sensitive to humidity and may absorb water. Containers should be kept tightly closed and protected from contamination with moisture and foreign materials, which can adversely affect processing.

The shelf life for YUREA Polyurethane Foam is 6 months for (Polyol) from the date of manufacture and should store indoors at temperatures of 20-30°C. The Polyol blend should mix well before use. As for the Isocyanate, it has a shelf life of 12 months from the date of manufacture. These materials should be stored indoors at temperatures between 20°C – 30°C.

When cleaning spills of either the Polyol or Isocyanate, wear goggles, impervious gloves, coveralls and boots, and a NIOSH/MSHA approved positive pressure supplied-air respirator. For the Isocyanate side spill, add an equal amount of neutralizing solution (90-95% water, 5-10% ammonia). For Polyol and Isocyanate side spill, add dry adsorbent, then shovel or sweep up and place in appropriate sized clean metal container and seal.

Let's Connect

Looking for quality and affordable materials for your project?​ Contact us to discover more